The group of Materials Laser Microprocessing (MLMP) is headed by Prof. Ioanna Zergioti, and is located at the Physics Department of the National Technical University of Athens. The group's research activities encompass laser materials processing for optoelectronics and biological applications.

1. Laser additive manufacturing

Among the main achievements of the MLMP group are the all-laser fabrication of organic thin film transistors, organic photovoltaics and sensors and the laser sintering/curing of micro and nanostructures (silver, copper) for a wide range of applications, including interconnections. After years of innovative research, the group is now capable of achieving laser printing (using the Laser Induced Forward Transfer technique) and laser sintering of conductive materials at speeds > 1m/s, with resolution down to <10μm.

2. Laser Bioprinting

MLMP has expertise in laser materials processing for optoelectronics and biological applications. Among the main achievements of the group is the use of laser pulses to directly print biomolecules on biosensors and polymers on chemical sensors. Furthermore it has recently demonstrated the selective printing of: (i) photosystem II laser direct immobilization for herbicides detection sensors (patent is pending) and (ii) organic polymers on capacitive sensors for chemical sensing applications.

Laboratory of Opto electronics, Lasers and their Applications

Prof. Ioanna Zergioti presents the Laboratory of Opto electronics, Lasers and their Applications. The video is part of the videos presented by the Research Committee of NTUA's laboratories.

Latest News

Job vacancy

Νέα θέση εργασίας για Μηχανολόγο Μηχανικό για αυτόματα συστήματα στην ερευνητική ομάδα "Υλικών και Μικροκατεργασίας με Λέιζερ" του ΕΜΠ. Διαβάστε περισσότερα

GRAPHENE WEEK 2021

Adamantia Logotheti received a Poster Award during #GrapheneWeek2021 for her work on #graphene and layered materials. Discover more in this spotlight interview!More

Upcoming events

SPIE Photonics West 2023

Participation in SPIE Photonics West Conference on 28 January - 2 February 2023 that took place in San Francisco, California, United States.

1. Oral Presentation (Invited paper) entitled "LIFT printing of cells and DNA damage study" authored by Evina Elezoglou, Panagiotis Karakaidos, Christina Kryou, Antonis Hatziapostolou, Apostolos Klinakis and Ioanna Zergioti.
2. Oral Presentation entitled "Laser bioprinting of cells and tumor organoids for organ-on-chip applications" authored by Evina Elezoglou, Maria Chliara, Marianneza Chatzipetrou, ‪Symeon Papazoglou, Katerina Tsilingiri, Apostolos Klinakis and I. Zergioti.
3. Oral Presentation entitled "Laser processed Ag nanoparticle conductive grids as bottom electrode for flexible ITO-free organic photovoltaics" authored by K. Andritsos, S. M. Pozov, I. Theodorakos, E. Georgiou, A. Ioakeimidis, A. Kabla, S. Melamed, F. de la Vega, S. A. Choulis and I. Zergioti.
4. Oral Presentation entitled "Laser induced transfer of 2D materials for optoelectronic applications" authored by Ilias Cheliotis, Adamantia Logotheti, Filimon Zacharatos, Amaia Pesquera, Amaia Zurutuza, Doron Naveh, Leonidas Tsetseris, Ioanna Zergioti.

Past events

NTUA Young Minds Section

Συμμετοχή στην Ημερίδα ACadmic Day των NTUA Young Minds Section (PHOxYS) την Παρασκευή 02 Δεκεμβρίου 2022 που πραγματοποιήθηκε στο Ceremonial Hall, Administration Building, Zografou Campus NTUA.

1. Παρουσίαση Poster με τίτλο «Laser bioprinting of cells for the development of autologous ex vivo bladder grafts» και συγραφείς C. Kryou, P. Karakaidos, E. Elezoglou, A. Klinakis and I. Zergioti.
2. Παρουσίαση Poster με τίτλο «Laser bioprinting of cells and tumor organoids for organ-on-chip applications» και συγραφείς E. Elezoglou, M. Chliara, M. Chatzipetrou, S. Papazoglou, K. Tsilingiri, A. Klinakis and I. Zergioti.
3. Παρουσίαση Poster με τίτλο «Laser-Induced printing of flexible touch sensor based on graphene single layers», και συγραφείς I. Cheliotis, A. Logotheti, D. Kaltsas, K. Magoula, F. Zacharatos, A. Pesquera, A. Zurutuza, L. Tsetseris, I. Zergioti.
4. Παρουσίαση Poster με τίτλο «Laser printing and sintering for flexible micro-electronic devices» και συγγραφείς K. Andritsos, I. Theodorakos, F. Zacharatos, S.M. Pozov, A. Kabla, Y. Porte, S.A. Choulis amd I. Zergioti.

Graphene Week 2022

Participation at the International Conference of Graphene Week 2022, that took place at Munich, Germany, between 5-9 September 2022.

1. Oral presentation with the work entitled “Laser induced Induced printing of flexible touch sensor based on 2D graphene and boron nitride layers”, authors: A. Logotheti, I. Cheliotis, F. Zacharatos, D. Kaltsas, A. Pesquera, A. Zurutuza, L. Tsetseris, and I. Zergioti.
2. Poster presentation with the work entitled “Thermal shielding of flexible electronic components using Graphene”, authors: K. Andritsos, F. Zacharatos, A. Logotheti and I. Zergioti.
3. Poster presentation with the work entitled “Laser Direct Transfer of graphene heterostructures and other 2D materials”, authors: A. Logotheti, D. Kaltsas, A. Pesquera, A. Zurutuza, D. Naveh, L. Tsetseris and I. Zergioti.

SUTD 2022

Participation at the International Conference of Additive Manufacturing for a Better World (SUTD), that took place at Tampines, Singapore, between 23-25 August 2022.

1. Virtual presentation with the work entitled “Digital laser printing and sintering of silver nanoparticle inks for the additive manufacturing of micro-conductive patterns on non-planar patterned flexible substrates”, authors: K. Andritsos, I. Theodorakos, F. Zacharatos, A. Kabla, S. Melamed, F. de la Vega, Y. Porte, P. Too and I. Zergioti.
2. Invited talk with the work entitled “Laser Bioprinting For Regenerative Applications And Organ On Chips”, presenter: I. Zergioti.

VI 'Photonics Meets Biology' Summer School and Workshop

Invited talk at the VI 'Photonics Meets Biology' Summer School and Workshop, that took place at Spetses Island, Greece, between 27 July -1 August 2022. The work is entitled “Laser Induced Forward Transfer as an enabling bioprinting technology”, presenter: I. Zergioti.

Junior Euromat 2022

Participation at Junior Euromat 2022 conference, that took place at Coimbra, Portugal, between 19-22 July, 2022.

1. Oral presentation with the work entitled “Parametric Study of Jet/Droplet Formation Process during LIFT Printing of Living Cell-Laden Bio-ink”, authors: C. Kryou, P. Karakaidos, A. Hatziapostolou, A. Klinakis, and I. Zergioti.
2. Oral presentation with the work entitled “Laser printed and sintered Ag nanoparticle metal-grids as bottom electrode for ITO-free organic photovoltaics”, authors: K. Andritsos, S. M. Pozov, I. Theodorakos, E. Georgiou, A. Ioakeimidis, A. Kabla, S. Melamed, F. de la Vega, S. A. Choulis and I. Zergioti.
3. Poster presentation with the work entitled “LIFT of CuO NP inks: Process parameters and High Speed visualization”, authors: K. Andritsos, E. Dimitriou, M. Makrygianni, I. Theodorakos, A. Kaldeli-Kerou, F. Zacharatos, N. Michailidis and I. Zergioti.
4. Poster presentation with the work entitled “Laser-Induced Forward Transfer for drug thin film printing”, authors: C. Kryou, I. M. Orfanou, C. Chandrinou, Z. Kanaki, C. Tamvakopoulos, A. Klinakis, and I. Zergioti.

Διοργάνωση βιομηχανικού workshop

Η ημερίδα διοργανώθηκε στα πλαίσια του έργου ΣΥΝ-LASER. Αφορούσε στις τεχνολογίες συναρμολόγησης και διασύνδεσης ηλεκτρονικών κυκλωμάτων. Ημερομηνία: Τετάρτη 20 Ιουλίου 2022 (10:00π.μ. – 13:00μ.μ.) Τόπος διεξαγωγής: Αμφιθέατρο Πολυμέσων Βιβλιοθήκης, Εθνικό Μετσόβιο Πολυτεχνείο

 

 

 

I3D22

Participation at the 5th International Conference on 3D Printing & Bioprinting, ΑΙ, Digital and Additive Manufacturing, that took place at Thessaloniki, Greece, between 6-7 July 2022.

1. Invited talk with the work entitled “Laser Induced Forward Transfer as an enabling bioprinting technology”, presenter: I. Zergioti.
2. Oral presentation with the work entitled “Laser bioprinting of cells and tumor organoids for organ-on-chip applications”, authors: E. Elezoglou, M. Chliara, M. Chatzipetrou, S. Papazoglou, K. Tsilingiri, A. Klinakis, I. Zergioti.

LPM 2022

Oral presentation at LPM 2022, hybrid conference, that took place at Dresden, Germany, between 7-10 June, 2022. The work is entitled “Laser-enabled microelectronic components assembly”, authors: M. Makrygianni, I. Theodorakos, K. Andritsos, P. Papadopoulos, M. Sotiropoulos, F. Zacharatos, N. Oikonomidis, C. Spandonidis, and I. Zergioti.

EMRS 2022 Spring Meeting

Participation at EMRS2022 Spring Meeting virtual conference, that took place between 30 May - 3 June, 2022.

1. Oral presentation with the work entitled “Conformal laser printing and sintering of Ag nanoparticle inks for the fabrication of micro-conductive patterns”, authors: K. Andritsos, I. Theodorakos, F. Zacharatos, A. Kabla, S. Melamed, F. de la Vega, Y. Porte, P. Too and I. Zergioti.
2. Poster presentation with the work entitled “LIFT and laser sintering of CuO NP inks: a digital process for low-cost and highly conductive micro-patterns”, authors: K. Andritsos, E. Dimitriou, M. Makrygianni, I. Theodorakos, A. Kaldeli-Kerou, F. Zacharatos, N. Michailidis and I. Zergioti.

COLA 2021/2022

Participation at COLA 2021/2022, that took place in April, 24 – 29, 2022 in a Hybrid format in Matsue, Japan & online.

1. Oral presentation with the work entitled “Laser-induced forward transfer of graphene on flexible substrates for touch sensor application”, authors: Adamantia Logotheti, Filimon Zacharatos, Dimitrios Kaltsas, Amaia Pesquera, Amaia Zurutuza, Leonidas Tsetseris, Ioanna Zergioti.
2. Poster presentation with the work entitled “Laser-induced forward transfer of Pb free solder paste for the digital assembly of electronic components”, authors: Ioannis Theodorakos, Marina Makrygianni, Filimon Zacharatos, Kostas Andritsos, Manolis Sotiropoulos, Panagiotis Papadopoulos, Christos Spandonidis, Ioanna Zergioti.
3. Poster presentation with the work entitled “Laser printing and laser sintering as a digital approach for the conformal fabrication of micro-conductive patterns on patterned flexible substrates”, authors: Ioannis Theodorakos, Kostas Andritsos, Filimon Zacharatos, Ayala Kabla, Semyon Melamed, Fernando de la Vega, Yoann Porte, Patrick Too, Ioanna Zergioti.

SPIE Photonics Europe 2022

Participation at SPIE Photonics Europe 2022 hybrid conference, that took place in Strasbourg, France, between 3 - 7 April, 2022.

1. Oral presentation with the work entitled “A miniature biophotonics platform for the diagnosis of cancer biomarkers”, authors: Marianneza Chatzipetrou, George Tsekenis, Lefteris Gounaridis, Erik Schreuder, René G. Heideman, Apostolos Klinakis, Hercules Avramopoulos, and Ioanna Zergioti.
2. Oral presentation with the work entitled “Laser bioprinting of cell-laden bioinks for organ-on-chip and sensor applications”, authors: E. Elezoglou, K. Tsilingiri, M. Chliara, M. Chatzipetrou, S. Papazoglou, A. Klinakis and I. Zergioti.
3. Poster presentation with the work entitled “Laser-Induced Forward Transfer for drug thin film printing”, authors: Christina Kryou, Ioanna-Maria Orfanou, Chrysoula Chandrinou, Zoi Kanaki, Constantin Tamvakopoulos, Apostolos Klinakis, Ioanna Zergioti.

Commission selects first EIC Transition projects

We are very proud and happy to be within the first selected EIC Transition projects for the project entitled "Laser digital transfer of 2D materials enabled photonics: from the lab 2 the fab (L2D2)"! EIC is a great initiative for Europe supporting innovation. This new scheme is designed to turn research results generated by EIC Pathfinder pilot projects and European Research Council (ERC) Proof of Concept projects into commercially viable ventures, by validating the technologies in real world settings and building the business case to bring the innovations to market.

MycoTWIN

Participation at MycoTWIN-MycoKey International Conference with a poster presentation entitled "Sensor surface functionalisation via Laser Induced Forward Transfer (LIFT): electrochemical pesticide detection in olive oil and its potential use in other applications", that took place in November 9-12, 2021 in Bari, Italy. Authors: Chrysoula Chandrinou, Dimitra Mandala, George Tsekenis, Dionysios Soulis, Ioanna Zergioti.

EUROMAT2021

Participation at EUROMAT 2021, that took place in September 12-16, 2021 as a virtual conference:

1. Poster presentation with the work entitled “Investigations on LIFT-printed MoS₂ ink for the realization of field-effect transistors”, authors: M. Makrygianni, Ch. Delalis, K. Andritsos, I. Zergioti.
2. Poster presentation with the work entitled “Laser printing of solution-processed graphene and assessment of jetting dynamics using high-speed imaging”, authors: Symeon Papazoglou, Ioanna Zergioti.

LPM2021

Participation at LPM 2021, that took place in June 8-11, 2021 as a Virtual On-Demand Conference:

1. Invited talk I. Zergioti, "Laser Induced Forward Transfer of 2D materials and computational modelling studies”.
2. Oral presentation with the work entitled “Laser printing and sintering of viscous Ag nanoparticle inks for high aspect ratio conductive micro-pattern”, Ioannis Theodorakos, Kostas Andritsos, Agamemnon Kalaitzis, Filimon Zacharatos, Ayala Kabla, Semyon Melamed, Fernando de la Vega and Ioanna Zergioti.

E-MRS 2021 Spring Meeting

Participation at E-MRS 2021 Spring Meeting Virtual Conference, that took place between May 31 to June 4, 2021:

1. Oral presentation with the work entitled “High speed solder paste laser printing for the assembly of ultra-fine pitch electronic components”, authors: Marina Makrygianni, Filimon Zacharatos, Dimitris Reppas, Nikos Oikonomidis, Christos Spandonidis, Ioanna Zergioti.
2. Oral presentation with the work entitled “Laser Induced Forward Transfer of graphene for flexible electronics and touch sensors”, authors: Adamantia Logotheti, Filimon Zacharatos, S. Papazoglou, Amaia Zurutuza, Amaia Pesquera and Ioanna Zergioti.
3. Poster presentation with the work entitled “Laser-Induced Forward Transfer of Molybdenum disulfide for printed electronics”, authors: M. Makrygianni, Ch. Delalis, K. Andritsos, I. Zergioti.
4. Poster presentation with the work entitled “Laser printing of solution-processed graphene and assessment of jetting dynamics using high-speed imaging”, authors: Symeon Papazoglou, Ioanna Zergioti.
5. Poster presentation with the work entitled “Sensor (bio)functionalization with Laser Induced Forward Transfer for contaminant detection in olive oil”, authors: Chrysoula Chandrinou, Dimitra Mandala, George Tsekenis, Dionysios Soulis, Ioanna Zergioti.

SPIE Photonics West 2021 Digital Forum

Participation at the international conference SPIE Photonics West 2021 Digital Forum, that was held between 6 - 11 March 2021:

1. Oral presentation of the work entitled “Laser induced forward transfer of solder paste for microelectronics assembly applications”, authors: Marina Makrygianni, Ioannis Theodorakos, Filimon Zacharatos, Dimitris Reppas, Panagiotis Papadopoulos, Nikolaos Oikonomidis, Christos Spandonidis, Ioanna Zergioti.
2. Oral presentation of the work entitled "Fabrication of thin films as a drug delivery tool via laser-induced forward transfer", authors: Christina Kryou, Ioanna-Maria Orfanou, Agamemnon Kalaitzis, Chrysa Chandrinou, Konstantinos Tamvakopoulos, Ioanna Zergioti.
3. Poster presentation of the work entitled "Direct enzyme immobilization on SPEs for electrochemical pesticide detection in olive oil, utilizing laser induced forward transfer", authors: Chrysoula Chandrinou, Dimitra Mandala, George Tsekenis, Dionysios Soulis, Ioanna Zergioti.

Βραδιά Ερευνητή Ε.Μ.Π. 2020

Επιστημονικός περίπατος στις πλέον πρόσφατες τάσεις της Έρευνας από τους ερευνητές του Εθνικού Μετσόβιου Πολυτεχνείου, της ομάδας Μικροεπεξεργασίας Υλικών και Διατάξεων με Λέιζερ (ΜΥΔΛ): 1. Εργαστήριο Μικροεκτύπωσης με Λέιζερ για την Κατασκευή Εύκαμπτων Ηλεκτρονικών, 2. Εργαστήριο Εκτύπωσης Κυττάρων για την Ανάπτυξη Ιστών στην Αναγεννητική Ιατρική.

Project HiperLAM Delivers Outstanding Results Using PV Nano Cell’s Sicrys™ Ink to Laser Print RFID antennas and fingerprint Sensors

PV Nano Cell Ltd., an innovative provider of inkjet-based conductive digital printing solutions and producer of conductive digital inks, announced that its Sicrys™ ink was successfully used to deliver exceptional results in HiperLAM - a European Union-funded program to laser print RFID antennas and fingerprint sensors. Press Release

SPIE 3D Printing Award Winners

Prof. Zergioti received the 3D Printing Award at the SPIE Photonics West 2020, San Francisco, 1-6 February 2020 for her work presented at the invited paper “Laser Induced Forward Transfer as a tool for precise bioprinting” as a recognition for their fundamental work in the development of a single step laser bioprinting and immobilization process that offers a significant step towards research of cell properties confined in scaffold environments.

SPIE is an international society advancing an interdisciplinary approach to the science and application of light. SPIE Photonics West 2020 succeeded over 5,000 presentations covered a wide range of topics including biomedical optics, biophotonics, industrial lasers, optoelectronics, microfabrication, MOEMS-MEMS, and displays. Plus, over 1300 exhibiting companies were at their booths with the latest in optics and photonics technology.  http://SPIE.org

LPM2020

Participation at LPM2020, that was held as a virtual symposium on the WWW only, between 23 - 26 June 2020:

1. Oral presentation of the work entitled “High speed soldering using laser printing for the assembly of electronic components”, authors: M. Makrygianni, K. Andritsos, D. Reppas, F. Zacharatos, N. Oikonomidis, Ch. Spandonidis, I. Zergioti.
2. Oral presentation of the work entitled “Fabrication of thin films as a drug delivery tool via Laser-Induced Forward Transfer”, authors: Agamemnon Kalaitzis, Christina Kryou, Chryssoula Chandrinou, Marianna Orfanou, Constantinos Tamvakopoulos, Ioanna Zergioti.

SPIE Photonics West

Ioanna Zergioti presented at SPIE Photonics West, The Moscone Center, San Francisco, California, United States between 1 - 6 February 2020:

1. The work entitled “Laser induced forward transfer as a tool for precise bioprinting”, invited talk. Author(s): Marianneza Chatzipetrou, Valentina Leva, George Tsekenis, Ioanna Zergioti
2. The work entitled “High speed laser printing and sintering of flexible RFID antennas and fingerprint sensors”. Author(s): Ioannis Theodorakos, Filimon Zacharatos, Marina Makrygianni, Ioanna Zergioti, Merijn Giesbers, Gari Arutinov, Simon Tuohi, Daniel Arnaldo, Dimitris Karnakis, Darshana Kariyapperuma, Brian Cobb, Richard Price, Patrick Too, Shane Norval, Jonathan Ankri, Arye Schwarzbaum, Alon Melamed
3. The work entitled “Highly resolved, on-demand LIFT of graphene and 2D materials and computational modelling of transfer enabling conditions”. Author(s): Mado Logotheti, Symeon Papazoglou, Dimitris Kaltsas, Filimon Zacharatos, Leonidas Tsetseris, Ioanna Zergioti

MNE2019

Poster presentation in Rhodes, Greece, on 23-26 September 2019.

1. of the work entitled “Optimization of solder paste laser printing parameters for the assembly of electronic devices”, authors: Marina Makrygianni, Elena Margariti, Nikos Oikonomidis, Christos Spandonidis, Ioanna Zergioti.
2. of the work entitled “Fabrication of a drug delivery tool via Laser Induced Forward Transfer”, authors: A. Kalaitzis, Ch. Kryou, Ch. Chandrinou, N. Adamopoulos, I. Zergioti.
3. of the work entitled “Copper micro-electrode fabrication using laser printing and laser sintering processes for on-chip antennas on flexible integrated circuits”, authors: O. Koritsoglou, I. Theodorakos, F. Zacharatos, M. Makrygianni, D. Kariyapperuma, R. Price, B. Cobb, S. Melamed, A. Kabla, F. de la Vega, I. Zergioti.

ALT19

Ioanna Zergioti presented an invited talk (keynote) entitled "High speed Laser Induced Forward Transfer for flexible electronics application”, on the 27th International Conference on Advanced Laser Technologies (ALT19), which was held in Prague, Czech Republic on September 15-20, 2019.

XXXIV Panhellenic Conference on Solid State Physics and Materials Science

Participation with the work entitled "Graphene on metallic substrates: a computational study on adsorption and the possibility of detachment" and authors: Dimitrios Kaltsas, Mado Logotheti, Symeon Papazoglou, Ioanna Zergioti and Leonidas Tsetseris, at the XXXIV Panhellenic Conference on Solid State Physics and Materials Science, that took place in Patra, Greece, on 11-14 September 2019.

EUROMAT 2019

Participation at the EUROMAT2019 congress, that took place in Stockholm, Sweden, on 1-5 September 2019.

1. Oral presentation of the work entitled "Investigations on LIFT-printed solder pastes for micro-electronics applications", authors: M. Makrygianni, E. Margariti, N. Oikonomidis, Ch. Spandonidis, I. Zergioti.
2. Oral presentation of the work entitled "High speed laser printing of conductive 2D components for flexible electronics applications", authors: Agamemnon Kalaitzis, Ioannis Theodorakos, Ayala Kabla, Fernando de la Vega, Ioanna Zergioti.
3. Poster presentation of the work entitled "Copper micro-electrode fabrication using laser printing and laser sintering processes for on-chip antennas on flexible integrated circuits", authors: Olga Koritsoglou, Ioannis Theodorakos, Filimon Zacharatos, Marina Makrygianni, Darshana Kariyapperuma, Richard Price, Bryan Cobb, Semyon Melamed, Ayala Kabla, Fernando de la Vega, Ioanna Zergioti.

I3D19

Ioanna Zergioti presented an invited talk entitled "Laser Induced Forward Transfer: an advanced tool for 3D bioprinting”, at the International Conference on 3D Printing, 3D Bioprinting, Digital & Additive Manufacturing (I3D19), which was held in Thessaloniki, Greece on July 1-5, 2019.

ICASS 2019

Ioanna Zergioti presented an invited talk entitled "Laser direct writing and sintering for flexible electronic applications”, at the 3rd International Conference on Applied Surface Science, which was held in Pisa, Italy on June 17-20, 2019.

E-MRS 2019 Spring Meeting

Filimon Zacharatos presented at E-MRS 2019 Spring Meeting, Nice, France held between 27 - 31 May 2019:

1. Poster presentation of the work entitled “Laser Induced Backward Transfer of metal and 2D nanostructures”, authors: Manto Logotheti, Simos Papazoglou, Filimon Zacharatos, Ioanna Zergioti.
2. Poster presentation of the work entitled “Laser Induced Forward Transfer of silver nano-inks for high resolution flexible interconnections: the effect of electromigration”, authors: F. Zacharatos, K. Andritsos, I. Theodorakos, I. Zergioti.

Optics-2019

Ioanna Zergioti presented an invited talk entitled "Laser Induced Forward Transfer of Inorganic materials for Flexible Electronic Components and Sensors”, at the 4th Global Summit & Expo on Laser Optics & Photonics (Optics-2019), which was held in Dubai, UAE on April 15-16, 2019.

EPoSS Annual Forum 2018 & MNBS 2018

Ioanna Zergioti presented an invited talk entitled "Introduction:the BIOFOS-success story”, at the joint event of EPoSS Annual Forum 2018 & MNBS 2018, which was held in Thessaloniki, Greece on October 16-18, 2018.

UltrafastLight-2018

Filimon Zacharatos presented an invited talk entitled "Laser Direct Printing of nanomaterials for flexible electronic components and sensors" at International Conference on Ultrafast Optical Science (UltrafastLight-2018), which was held in Moscow, Russia on October 1-5, 2018.

XXXIII Panhellenic Conference on Solid State Physics and Materials Science

1. Ioanna Zergioti presented the work entitled "Laser Direct Printing of advanced materials for flexible electronic components and sensors", on 17 September 2018.
2. Filimon Zacharatos presented the work entitled "Laser Transfer of Ag nanowire networks and Au nanoparticle highly ordered arrays on flexible substrates", on 17 September 2018.
3. Agamemnon Kalaitzis presented the work entitled "Jet dynamics of Newtonian and non-Newtonian fluids via LIFT: Experimental study and simulation", on 19 September 2018.

The Conference was held in Nicosia, Cyprus on 17-19 September 2018. View Advanced Program

SPIE Remote Sensing 2018

Ioanna Zergioti presented an invited talk entitled "Laser direct-writing of flexible electronic components and sensors" and an oral talk entitled "Selective laser sintering of Ag nanoparticle micro-patterns at high repetition rates" at International Conference on Remote Sensing and Defence + Security, which was held in Berlin, Germany on September 10-13, 2018.

International Conference on Functional Nanomaterials and Nanodevices

Ioanna Zergioti presented an invited talk entitled "Laser Direct Printing of nanomaterials for flexible electronic components and sensors" at International Conference on Functional Nanomaterials and Nanodevices, held in Vienna, Austria on September 3-5, 2018.

LPM 2018

Ioanna Zergioti presented the work entitled "Fluid dynamics of jetting by means of Laser Induced Forward Transfer" at LPM 2018, which took place on June 25-28, 2018 in Edinburgh, Scotland, UK .

E-MRS 2018 Spring Meeting

Marina Makrygianni presented at E-MRS 2018 Spring Meeting, Strasbourg, France between 18 June - 22 June 2018:

1. The work entitled “Jet dynamics of Newtonian and non-Newtonian fluids via LIFT: Experimental study and simulation”.
2. The work entitled “Laser-based, site-specific fabrication of protein-incorporated hydrogels on surfaces for biosensing applications”.

Hellenic Innovation Forum 2017

Ιωάννα Ζεργιώτη συμμετείχε στο πολυσυνέδριο Hellenic Innovation Forum που πραγματοποιήθηκε την Τετάρτη 1 και Πέμπτη 2 Μαρτίου 2017 στο ξενοδοχείο Divani Caravel.

SPIE Photonics West

Symeon Papazoglou presented at SPIE Photonics West, The Moscone Center, San Francisco, California, United States between 28 January - 2 February 2017:

1. The work entitled “Laser induced forward transfer technique for the immobilization of biomaterials in biosensors applications”.
2. The work entitled “High-speed imaging and evolution dynamics of laser induced deposition of conductive inks”.

6ο Πανελλήνιο Συνέδριο Μεταλλικών Υλικών

Ο Σίμος Παπάζογλου παρουσίασε την εργασία με τίτλο "Laser printing of metallic and semiconducting nanoparticles inks for the fabrication of chemical sensors on flexible substrates" στο 6ο Πανελλήνιο Συνέδριο Μεταλλικών Υλικών, που πραγματοποιήθηκε στα Ιωάννινα 7–9 Δεκεμβρίου 2016.

Φόρουμ για την καινοτομία

Ο Φιλήμονας Ζαχαράτος έδωσε ομιλία με τίτλο "Laser printing of functional materials" στην Ελληνογαλλική ημερίδα για την Επιχειρηματικότητα και την Καινοτομία στο ΦΟΡΟΥΜ ΚΑΙΝΟΤΟΜΙΑΣ, που πραγματοποιήθηκε στο Γαλλικό Ινστιτούτο Ελλάδος (I.F.G.) τη Παρασκευή 25 Νοεμβρίου 2016.

IEEE SENSORS 2016

Ioanna Zergioti presented a tutorial work entitled "BIOFOS: MICRO-RING RESONATOR-BASED BIOPHOTONIC SYSTEM FOR FOOD ANALYSIS " and an oral talk entitled "ALL LASER PRINTED RESISTIVE CHEMICAL SENSOR: FABRICATION AND EVALUATION" at the IEEE SENSORS 2016, which was held in Orlando, Florida USA on 30 October-2 November 2016.

2016 EU Research & Innovation Day

Ioanna Zergioti participated at the 2016 EU Research & Innovation Day, which was held in Seoul, Korea on 4 October 2016.

XXXII Panhellenic Conference on Solid State Physics and Materials Science

Ioanna Zergioti presented the work entitled "Laser fabrication of a hybrid platform combining electrical and optical interconnects" at the XXXII Panhellenic Conference on Solid State Physics and Materials Science, which was held in Ioannina, Greece on 18-21 September 2016.

4th Hellenic Forum for Science, Technology & Innovation

Ioanna Zergioti presented an invited talk entitled "BIOFOS: Micro-ring resonator-based biophotonic system for food analysis" at the 4th Hellenic Forum for Science, Technology & Innovation which was held in Athens , Greece NCSR DEMOKRITOS CAMPUS on July 11-15, 2016.

ISFOE16

Ioanna Zergioti presented an invited talk entitled "Flexible platform for laser fabricated electrical and optical interconnects" at the 9th International Symposium on Flexible Organic Electronics (ISFOE16) which was held in Thessaloniki, Greece on 4-7 July 2016.

Nano-electronics Symposium

Ioanna Zergioti presented an invited talk entitled "Biophotonics system for food analysis" at Nano-electronics Symposium of the European Innovation week which was held in Taipei, Taiwan on June 2, 2016.

International Symposium on Laser Precision Microfabrication (LPM2016)

Ioanna Zergioti is a member of the scientific committee: The 17th International Symposium on Laser Precision Microfabrication which was held in Xi’an, China from May 23-26, 2016.

1. Ioanna Zergioti presented the work entitled “Laser printing and patterning of conductive and carbon based materials and their applications”, with the following authors: M. Makrygianni, S. Papazoglou, F. Zacharatos, S. Chatzandroulis, I. Zergioti.
2. Ioanna Zergioti presented the work entitled “Laser Induced Forward Transfer technique for the immobilization of biomaterials”, with the following authors: M. Chatzipetrou, M. Massaouti, S. Papazoglou, I. Zergioti.

Patras Innovation Quest 2016

Ο Σίμος Παπάζογλου παρουσίασε την "Πρωτοποριακή τεχνική εκτύπωσης λειτουργικών υλικών και μικροδιατάξεων με λέιζερ" στην έκθεση Patras Innovation Quest 2016 (PatrasIQ 2016), που πραγματοποιήθηκε από 15 ως 17 Απριλίου 2016 στο αθλητικό κέντρο «Δημήτρης Τόφαλος», Πάτρα.

SPIE Photonics West 2016

1. Ioanna Zergioti presented an invited talk entitled “Laser induced forward transfer: A technique for 3D manufacturing of functional devices”, [9738-11].
2. Ioanna Zergioti presented the work entitled “Laser induced forward transfer: a novel tool for printing sensors and characterizing surface wetting properties”, [9735-13].

The Conference was held in San Francisco, United States, 16 - 18 February 2016. View Advanced Program

Innovations in Large-Area Electronics (innoLAE 2016)

Ioanna Zergioti's group and LaserMicroFab attended innoLAE 2016 with three oral and poster presentations in "Lasers for additive and subtractive LAE manufacturing" workshop. innoLAE 2016 will be held in Robinson College, Cambridge (UK) on the 1st and 2nd of February 2016. Conference schedule

Συμμετοχή στον 3ο Διαγωνισμό Εφαρμοσμένης Έρευνας & Καινοτομίας «Η Ελλάδα Καινοτομεί!»

Η Ερευνητική Ομάδα με μέλη τους υποψήφιους διδάκτορες Γιάννη Θεοδωράκο, Μαριανέζα Χατζηπέτρου, Μαρίνα Μακρύγιαννη, Σίμο Παπάζογλου, τους μεταδιδάκτορες Μαρία Μασαούτη, Φιλήμονα Ζαχαράτο και εκπρόσωπο την Αναπληρώτρια Καθηγήτρια Ιωάννα Ζεργιώτη πήρε μέρος στον πρώτο κύκλο του διαγωνισμού με την πρόταση «Έξυπνη τεχνική εκτύπωσης λειτουργικών υλικών και μικροδιατάξεων με λέιζερ», κατά τον οποίο συγκαταλέχθηκε στους 10 φιναλίστ του πεδίου ΚΑΙΝΟΤΟΜΙΑ. Η Β΄ Φάση του διαγωνισμού ολοκληρώθηκε με τη διαδικασία της ανοιχτής, στο κοινό, προφορικής αξιολόγησης και την τελετή βράβευσης. Η Τελετή βράβευσης πραγματοποιήθηκε τη Τρίτη 23 Φεβρουαρίου του 2016. Η ομάδα βραβεύτηκε με το δέυτερο βραβείο στη κατηγορία της Καινοτομίας:

 

 

ISFOE 2015

LaserMicroFab FP7-IAPP co-organised the workshop on “Laser Technologies” held at the 8th International Symposium on Flexible Organic Electronics 6-9 July 2015 in Thessaloniki, Greece. View Advanced Program

SPIE Photonics West 2015

1. Ioanna Zergioti presented the European project “BIOFOS: micro-ring resonator-based biophotonic system for food analysis”, on 9 February 2015.
2. Symeon Papazoglou presented the work entitled “All-printed reduced graphene oxide gas sensors,” on 10 February 2015. The authors of this paper are: Symeon Papazoglou, Marina Makrygianni, Myrto K. Filippidou, Stavros Chatzandroulis and Ioanna Zergioti.
3. Symeon Papazoglou presented the work entitled “Raman study for drug delivery applications and tissue imaging”, on 9 February 2015. The authors of this paper are: Symeon Papazoglou, Ioannis Theodorakos, Maria Patitsa, Apostolos Klinakis, Ioanna Zergioti, Yannis S. Raptis.
4. The paper, ““High speed laser transfer (LIFT), thin-film patterning and selective sintering of printed Ag nanoparticle inks for electronic device integration on flexible substrates” has been accepted for Poster presentation and was presented on 10 February 2015. The authors of this paper are: Filimon Zacharatos, Stéphanie Leyder, Riccardo Geremia, Daniel Puerto, E. Biver, Ludovic Rapp, Philippe Delaporte, Anne Patricia B. Alloncle, Dimitris Karnakis and Ioanna Zergioti.

The Conference was held in San Francisco, United States, 7 - 12 February 2015. View Advanced Program

EMRS 2015 Spring Meeting

Ioanna Zergioti is a member of the organization committee of symposium CC: Laser and plasma processing for advanced applications in material science which was held at E-MRS Spring Meeting in Lille (France) from May 11-15, 2015.More

Invited Talk at LPM2015

Ioanna Zergioti gave an invited talk entitled “Laser printing and functionalization of sensors” at the 16th International Symposium on Laser Precision Microfabrication (LPM2015) on 26-29 of May 2015, Fukuoka, Japan

ISFOE 2013 – 2014

LaserMicroFab FP7-IAPP co-organised the workshop on “Laser Technologies for Organic & Printed Electronics” held at the 7th International Symposium on Flexible Organic Electronics 7-10 July 2014 in Thessaloniki, Greece. The primary goal of the workshop «Laser Technologies for Organic & Printed Electronics» was to promote laser technology and applications within the organic electronics community, focusing on both fundamental and applied issues concerning laser materials processing, characterisation and assessment, devices functionality, and applications.

ALT 2014

Advanced Laser Technogies (ALT) 2014 was held in Cassis, France on 6-10 October 2014.View Advanced Program

Ioanna Zergioti has given an invited talk entitled “Laser print and functionalize sensors” on 7 October 2014.